Reference library
B6 Paper Size
B6 measures 125 x 176 mm, 12.5 x 17.6 cm, or 4.92 x 6.93 in. See pixel dimensions by DPI, aspect ratio, bleed setup, comparisons, and related tools.
Last checked: 2026-05-01
How we calculate this
Methodology and source handling
We convert physical sizes to inches, multiply by the selected DPI/PPI value, and round to whole pixels.
Quick answer
Copy-ready answer
B6 is 125 x 176 mm, 12.5 x 17.6 cm, or 4.92 x 6.93 in. At 300 DPI, B6 is 1476 x 2079 px.
Dimensions and specs
| Millimeters | 125 x 176 mm | |
|---|---|---|
| Centimeters | 12.5 x 17.6 cm | |
| Inches | 4.92 x 6.93 in | |
| 300 DPI pixels | 1476 x 2079 px | |
| Aspect ratio | 1:1.408 | |
| Standard family | ISO B Series |
Pixels
Pixel dimensions by DPI
| DPI / PPI | Width | Height | Use |
|---|---|---|---|
| 72 DPI | 354 px | 499 px | Screen or draft reference density |
| 96 DPI | 472 px | 665 px | Screen or draft reference density |
| 150 DPI | 738 px | 1039 px | Screen or draft reference density |
| 300 DPI | 1476 px | 2079 px | Common high-quality print setup |
| 600 DPI | 2953 px | 4157 px | High-resolution archival or print workflow |
Formula
How to calculate this size
125 mm x 300 PPI = 1,476 px wide.
Use this when the artwork stops at the finished edge.
Add 3 mm per side before calculating pixels when artwork reaches the edge.
Common mistakes
Avoid these b6 paper size problems
A paper size needs a PPI target before pixels mean anything for print.
Portrait and landscape use the same dimensions, but width and height swap in the export.
Paper pages show trim size first; add bleed only when the design prints to the edge.
Calculator
Calculate pixels and bleed
Enter any DPI to calculate the pixel dimensions for this physical size.
Compare
Compare B6 Paper Size
Open a curated comparison or send both sizes into the compare tool with a fragment URL.
- B6 Paper Size
- 125 x 176 mm
- B5
- 176 x 250 mm
- B6 Paper Size
- 125 x 176 mm
- B7
- 88 x 125 mm
- B6 Paper Size
- 125 x 176 mm
- A4
- 210 x 297 mm
- B6 Paper Size
- 125 x 176 mm
- US Letter
- 215.9 x 279.4 mm
Workflow
Use B6 Paper Size in a finished file
Copy the millimeter, centimeter, or inch dimensions for the selected paper standard.
Use 300 PPI for most sharp print exports, or match the printer requirement.
Multiply inches by PPI, then add bleed only when artwork reaches the trimmed edge.
Related
Related pages and tools
Same branch
Nearby pages
FAQ
Common questions
What is the exact B6 size?
B6 measures 125 x 176 mm, 12.5 x 17.6 cm, or approximately 4.92 x 6.93 in.
What is B6 in pixels at 300 DPI?
B6 at 300 DPI is 1476 x 2079 px when rounded to the nearest whole pixel.
What aspect ratio is B6?
B6 has an aspect ratio of about 1:1.408 based on its 125 x 176 mm physical dimensions.
Should I add bleed to a B6 design?
For print work, a common starting point is 3 mm bleed on each side, making the document 131 x 182 mm before trimming. Confirm final bleed with your printer.
References
Sources and references
ISO 216 physical dimensions. Pixel values are calculated from millimeters / 25.4 x DPI and rounded to whole pixels.
-
ISO 216:2007
Used for ISO A and B series physical paper dimensions.
-
W3C CSS Values and Units Module
Used for CSS unit definitions, absolute unit relationships, and CSS px behavior.
Last checked: 2026-05-01