Reference library
B5 Paper Size
B5 measures 176 x 250 mm, 17.6 x 25 cm, or 6.93 x 9.84 in. See pixel dimensions by DPI, aspect ratio, bleed setup, comparisons, and related tools.
Last checked: 2026-05-01
How we calculate this
Methodology and source handling
We convert physical sizes to inches, multiply by the selected DPI/PPI value, and round to whole pixels.
Quick answer
Copy-ready answer
B5 is 176 x 250 mm, 17.6 x 25 cm, or 6.93 x 9.84 in. At 300 DPI, B5 is 2079 x 2953 px.
Dimensions and specs
| Millimeters | 176 x 250 mm | |
|---|---|---|
| Centimeters | 17.6 x 25 cm | |
| Inches | 6.93 x 9.84 in | |
| 300 DPI pixels | 2079 x 2953 px | |
| Aspect ratio | 1:1.4205 | |
| Standard family | ISO B Series |
Pixels
Pixel dimensions by DPI
| DPI / PPI | Width | Height | Use |
|---|---|---|---|
| 72 DPI | 499 px | 709 px | Screen or draft reference density |
| 96 DPI | 665 px | 945 px | Screen or draft reference density |
| 150 DPI | 1039 px | 1476 px | Screen or draft reference density |
| 300 DPI | 2079 px | 2953 px | Common high-quality print setup |
| 600 DPI | 4157 px | 5906 px | High-resolution archival or print workflow |
Formula
How to calculate this size
176 mm x 300 PPI = 2,079 px wide.
Use this when the artwork stops at the finished edge.
Add 3 mm per side before calculating pixels when artwork reaches the edge.
Common mistakes
Avoid these b5 paper size problems
A paper size needs a PPI target before pixels mean anything for print.
Portrait and landscape use the same dimensions, but width and height swap in the export.
Paper pages show trim size first; add bleed only when the design prints to the edge.
Calculator
Calculate pixels and bleed
Enter any DPI to calculate the pixel dimensions for this physical size.
Compare
Compare B5 Paper Size
Open a curated comparison or send both sizes into the compare tool with a fragment URL.
- B5 Paper Size
- 176 x 250 mm
- B4
- 250 x 353 mm
- B5 Paper Size
- 176 x 250 mm
- B6
- 125 x 176 mm
- B5 Paper Size
- 176 x 250 mm
- A4
- 210 x 297 mm
- B5 Paper Size
- 176 x 250 mm
- US Letter
- 215.9 x 279.4 mm
Workflow
Use B5 Paper Size in a finished file
Copy the millimeter, centimeter, or inch dimensions for the selected paper standard.
Use 300 PPI for most sharp print exports, or match the printer requirement.
Multiply inches by PPI, then add bleed only when artwork reaches the trimmed edge.
Related
Related pages and tools
Same branch
Nearby pages
FAQ
Common questions
What is the exact B5 size?
B5 measures 176 x 250 mm, 17.6 x 25 cm, or approximately 6.93 x 9.84 in.
What is B5 in pixels at 300 DPI?
B5 at 300 DPI is 2079 x 2953 px when rounded to the nearest whole pixel.
What aspect ratio is B5?
B5 has an aspect ratio of about 1:1.4205 based on its 176 x 250 mm physical dimensions.
Should I add bleed to a B5 design?
For print work, a common starting point is 3 mm bleed on each side, making the document 182 x 256 mm before trimming. Confirm final bleed with your printer.
References
Sources and references
ISO 216 physical dimensions. Pixel values are calculated from millimeters / 25.4 x DPI and rounded to whole pixels.
-
ISO 216:2007
Used for ISO A and B series physical paper dimensions.
-
W3C CSS Values and Units Module
Used for CSS unit definitions, absolute unit relationships, and CSS px behavior.
Last checked: 2026-05-01