Reference library
Ledger Paper Size
Ledger measures 431.8 x 279.4 mm, 43.18 x 27.94 cm, or 17 x 11 in. See pixel dimensions by DPI, aspect ratio, bleed setup, comparisons, and related tools.
Last checked: 2026-05-01
How we calculate this
Methodology and source handling
We convert physical sizes to inches, multiply by the selected DPI/PPI value, and round to whole pixels.
Quick answer
Copy-ready answer
Ledger is 431.8 x 279.4 mm, 43.18 x 27.94 cm, or 17 x 11 in. At 300 DPI, Ledger is 5100 x 3300 px.
Dimensions and specs
| Millimeters | 431.8 x 279.4 mm | |
|---|---|---|
| Centimeters | 43.18 x 27.94 cm | |
| Inches | 17 x 11 in | |
| 300 DPI pixels | 5100 x 3300 px | |
| Aspect ratio | 1.5455:1 | |
| Standard family | North American Office |
Pixels
Pixel dimensions by DPI
| DPI / PPI | Width | Height | Use |
|---|---|---|---|
| 72 DPI | 1224 px | 792 px | Screen or draft reference density |
| 96 DPI | 1632 px | 1056 px | Screen or draft reference density |
| 150 DPI | 2550 px | 1650 px | Screen or draft reference density |
| 300 DPI | 5100 px | 3300 px | Common high-quality print setup |
| 600 DPI | 10200 px | 6600 px | High-resolution archival or print workflow |
Formula
How to calculate this size
431.8 mm x 300 PPI = 5,100 px wide.
Use this when the artwork stops at the finished edge.
Add 3 mm per side before calculating pixels when artwork reaches the edge.
Common mistakes
Avoid these ledger paper size problems
A paper size needs a PPI target before pixels mean anything for print.
Portrait and landscape use the same dimensions, but width and height swap in the export.
Paper pages show trim size first; add bleed only when the design prints to the edge.
Calculator
Calculate pixels and bleed
Enter any DPI to calculate the pixel dimensions for this physical size.
Compare
Compare Ledger Paper Size
Open a curated comparison or send both sizes into the compare tool with a fragment URL.
- Ledger Paper Size
- 431.8 x 279.4 mm
- Junior Legal
- 127 x 203.2 mm
- Ledger Paper Size
- 431.8 x 279.4 mm
- Tabloid
- 279.4 x 431.8 mm
- Ledger Paper Size
- 431.8 x 279.4 mm
- A4
- 210 x 297 mm
- Ledger Paper Size
- 431.8 x 279.4 mm
- US Letter
- 215.9 x 279.4 mm
Workflow
Use Ledger Paper Size in a finished file
Copy the millimeter, centimeter, or inch dimensions for the selected paper standard.
Use 300 PPI for most sharp print exports, or match the printer requirement.
Multiply inches by PPI, then add bleed only when artwork reaches the trimmed edge.
Related
Related pages and tools
Same branch
Nearby pages
FAQ
Common questions
What is the exact Ledger size?
Ledger measures 431.8 x 279.4 mm, 43.18 x 27.94 cm, or approximately 17 x 11 in.
What is Ledger in pixels at 300 DPI?
Ledger at 300 DPI is 5100 x 3300 px when rounded to the nearest whole pixel.
What aspect ratio is Ledger?
Ledger has an aspect ratio of about 1.5455:1 based on its 431.8 x 279.4 mm physical dimensions.
Should I add bleed to a Ledger design?
For print work, a common starting point is 3 mm bleed on each side, making the document 437.8 x 285.4 mm before trimming. Confirm final bleed with your printer.
References
Sources and references
North American office paper standards physical dimensions. Pixel values are calculated from millimeters / 25.4 x DPI and rounded to whole pixels.
-
HP paper size reference
Used as a reputable printer reference for North American office, ANSI, and envelope dimensions.
-
W3C CSS Values and Units Module
Used for CSS unit definitions, absolute unit relationships, and CSS px behavior.
Last checked: 2026-05-01