Skip to content
PixelMeasures

Reference library

Arch E1 Paper Size

Arch E1 measures 762 x 1066.8 mm, 76.2 x 106.68 cm, or 30 x 42 in. See pixel dimensions by DPI, aspect ratio, bleed setup, comparisons, and related tools.

Last checked: 2026-05-01

See quick answer Compare sizes
Last checked: 2026-05-01 Source: ASME Y14.1 drawing sheet size and format Found a spec change? Send correction.

How we calculate this

Methodology and source handling

We convert physical sizes to inches, multiply by the selected DPI/PPI value, and round to whole pixels.

Methodology Editorial policy

Quick answer

Copy-ready answer

Arch E1 is 762 x 1066.8 mm, 76.2 x 106.68 cm, or 30 x 42 in. At 300 DPI, Arch E1 is 9000 x 12600 px.

762 x 1066.8 mm

Dimensions and specs

Millimeters 762 x 1066.8 mm
Centimeters 76.2 x 106.68 cm
Inches 30 x 42 in
300 DPI pixels 9000 x 12600 px
Aspect ratio 1:1.4
Standard family Architectural

Pixels

Pixel dimensions by DPI

DPI / PPIWidthHeightUse
72 DPI 2160 px 3024 px Screen or draft reference density
96 DPI 2880 px 4032 px Screen or draft reference density
150 DPI 4500 px 6300 px Screen or draft reference density
300 DPI 9000 px 12600 px Common high-quality print setup
600 DPI 18000 px 25200 px High-resolution archival or print workflow

Formula

How to calculate this size

Pixel formulapixels = millimeters / 25.4 x PPI

762 mm x 300 PPI = 9,000 px wide.

Trim result9,000 x 12,600 px

Use this when the artwork stops at the finished edge.

Bleed result9,071 x 12,671 px

Add 3 mm per side before calculating pixels when artwork reaches the edge.

Common mistakes

Avoid these arch e1 paper size problems

Mixing screen pixels with print quality

A paper size needs a PPI target before pixels mean anything for print.

Forgetting orientation

Portrait and landscape use the same dimensions, but width and height swap in the export.

Adding bleed to a paper reference

Paper pages show trim size first; add bleed only when the design prints to the edge.

Calculator

Calculate pixels and bleed

Enter any DPI to calculate the pixel dimensions for this physical size.

Compare

Compare Arch E1 Paper Size

Open a curated comparison or send both sizes into the compare tool with a fragment URL.

compare tool Arch E1 vs Arch E
Arch E1 Paper Size
762 x 1066.8 mm
Arch E
914.4 x 1219.2 mm
27.1% smaller than Arch E Paper Size. 0.0357 decimal ratio difference compare tool Arch E1 vs A4
Arch E1 Paper Size
762 x 1066.8 mm
A4
210 x 297 mm
1203.4% larger than A4 Paper Size in Pixels, Millimeters, Centimeters and Inches. 0.0072 decimal ratio difference compare tool Arch E1 vs US Letter
Arch E1 Paper Size
762 x 1066.8 mm
US Letter
215.9 x 279.4 mm
1247.6% larger than US Letter Paper Size. 0.0584 decimal ratio difference
Arch E1 belongs to the Architectural family. Use this reference for print setup, document layout, template sizing, pixel conversion, and comparisons with nearby paper sizes. Pixel dimensions are calculated from the physical size and selected DPI.

Workflow

Use Arch E1 Paper Size in a finished file

Confirm the physical size

Copy the millimeter, centimeter, or inch dimensions for the selected paper standard.

Choose PPI

Use 300 PPI for most sharp print exports, or match the printer requirement.

Calculate pixels

Multiply inches by PPI, then add bleed only when artwork reaches the trimmed edge.

Related

Related pages and tools

same series Arch E paper size common alternative A4 paper size common alternative US Letter paper size comparison Arch E1 vs Arch E comparison Arch E1 vs A4 tool DPI calculator tool Print bleed calculator

Same branch

Nearby pages

A4 Paper Size in Pixels, Millimeters, Centimeters and Inches A5 Paper Size Legal Paper Size US Letter Paper Size A0 Paper Size A1 Paper Size A10 Paper Size A2 Paper Size

FAQ

Common questions

What is the exact Arch E1 size?

Arch E1 measures 762 x 1066.8 mm, 76.2 x 106.68 cm, or approximately 30 x 42 in.

What is Arch E1 in pixels at 300 DPI?

Arch E1 at 300 DPI is 9000 x 12600 px when rounded to the nearest whole pixel.

What aspect ratio is Arch E1?

Arch E1 has an aspect ratio of about 1:1.4 based on its 762 x 1066.8 mm physical dimensions.

Should I add bleed to a Arch E1 design?

For print work, a common starting point is 3 mm bleed on each side, making the document 768 x 1072.8 mm before trimming. Confirm final bleed with your printer.

References

Sources and references

North American architectural drawing sizes physical dimensions. Pixel values are calculated from millimeters / 25.4 x DPI and rounded to whole pixels.

Last checked: 2026-05-01