Reference library
ANSI B Paper Size
ANSI B measures 279.4 x 431.8 mm, 27.94 x 43.18 cm, or 11 x 17 in. See pixel dimensions by DPI, aspect ratio, bleed setup, comparisons, and related tools.
Last checked: 2026-05-01
How we calculate this
Methodology and source handling
We convert physical sizes to inches, multiply by the selected DPI/PPI value, and round to whole pixels.
Quick answer
Copy-ready answer
ANSI B is 279.4 x 431.8 mm, 27.94 x 43.18 cm, or 11 x 17 in. At 300 DPI, ANSI B is 3300 x 5100 px.
Dimensions and specs
| Millimeters | 279.4 x 431.8 mm | |
|---|---|---|
| Centimeters | 27.94 x 43.18 cm | |
| Inches | 11 x 17 in | |
| 300 DPI pixels | 3300 x 5100 px | |
| Aspect ratio | 1:1.5455 | |
| Standard family | ANSI |
Pixels
Pixel dimensions by DPI
| DPI / PPI | Width | Height | Use |
|---|---|---|---|
| 72 DPI | 792 px | 1224 px | Screen or draft reference density |
| 96 DPI | 1056 px | 1632 px | Screen or draft reference density |
| 150 DPI | 1650 px | 2550 px | Screen or draft reference density |
| 300 DPI | 3300 px | 5100 px | Common high-quality print setup |
| 600 DPI | 6600 px | 10200 px | High-resolution archival or print workflow |
Formula
How to calculate this size
279.4 mm x 300 PPI = 3,300 px wide.
Use this when the artwork stops at the finished edge.
Add 3 mm per side before calculating pixels when artwork reaches the edge.
Common mistakes
Avoid these ansi b paper size problems
A paper size needs a PPI target before pixels mean anything for print.
Portrait and landscape use the same dimensions, but width and height swap in the export.
Paper pages show trim size first; add bleed only when the design prints to the edge.
Calculator
Calculate pixels and bleed
Enter any DPI to calculate the pixel dimensions for this physical size.
Compare
Compare ANSI B Paper Size
Open a curated comparison or send both sizes into the compare tool with a fragment URL.
- ANSI B Paper Size
- 279.4 x 431.8 mm
- ANSI A
- 215.9 x 279.4 mm
- ANSI B Paper Size
- 279.4 x 431.8 mm
- ANSI C
- 431.8 x 558.8 mm
- ANSI B Paper Size
- 279.4 x 431.8 mm
- A4
- 210 x 297 mm
- ANSI B Paper Size
- 279.4 x 431.8 mm
- US Letter
- 215.9 x 279.4 mm
Workflow
Use ANSI B Paper Size in a finished file
Copy the millimeter, centimeter, or inch dimensions for the selected paper standard.
Use 300 PPI for most sharp print exports, or match the printer requirement.
Multiply inches by PPI, then add bleed only when artwork reaches the trimmed edge.
Related
Related pages and tools
Same branch
Nearby pages
FAQ
Common questions
What is the exact ANSI B size?
ANSI B measures 279.4 x 431.8 mm, 27.94 x 43.18 cm, or approximately 11 x 17 in.
What is ANSI B in pixels at 300 DPI?
ANSI B at 300 DPI is 3300 x 5100 px when rounded to the nearest whole pixel.
What aspect ratio is ANSI B?
ANSI B has an aspect ratio of about 1:1.5455 based on its 279.4 x 431.8 mm physical dimensions.
Should I add bleed to a ANSI B design?
For print work, a common starting point is 3 mm bleed on each side, making the document 285.4 x 437.8 mm before trimming. Confirm final bleed with your printer.
References
Sources and references
ANSI/ASME Y14.1 physical dimensions. Pixel values are calculated from millimeters / 25.4 x DPI and rounded to whole pixels.
-
ASME Y14.1 drawing sheet size and format
Used for ANSI and architectural drawing sheet size families.
-
HP paper size reference
Used as a reputable printer reference for North American office, ANSI, and envelope dimensions.
-
W3C CSS Values and Units Module
Used for CSS unit definitions, absolute unit relationships, and CSS px behavior.
Last checked: 2026-05-01